Skip to main content
All CollectionsOther
What is control unit history and how to use it?
What is control unit history and how to use it?
Edvinas avatar
Written by Edvinas
Updated over a week ago

Control unit history displays the changes that were done with the unit such as with Gateway coding, Coding, Long coding, Adaptation, Basic settings, Coding II, Diagnostic session, App, Backup, Fault, Full scan.

To access this function follow the instructions (The history is saved in the OBDeleven system and to access it the internet connection is required):

  • Press button to open side menu.

  • – the control unit history can be accessed while either connected or not connected to the vehicle. The important requirement is to be logged in with a user account.

  • Press the "Garage".

  • Select the vehicle.

  • Press the "Control Units".

  • Select the control unit.

  • Press "History".

How to use History?

  • There are displayed changes that were done in selected control unit.

  • Press button to open filter menu of displayed changes.

  • Press on to select of what period changes must be displayed.

  • Turn ON or OFF button to display or to not display the changes that were archived.

  • Select the type of changes to display.

  • Press to CLEAR or SELECT all types.

  • After editing the filter press "OK" to finish.

  • Press button to archive the selected history.

  • Press button for additional information about the selected history.

Did this answer your question?