This function reads all sorts of data from the control unit in real-time. You can also access the gathered data offline. Follow the instructions to access it:
Open the list of control units by pressing
.
Select the needed control unit by
tapping on it.
Open Live data by pressing
.
The use of Live Data (Values selection):
Open the list of values by pressing
.
Select the needed value by tapping on it
.
Value has been
selected and displayed. It shows that the selected value is in channel 003. The descriptions of live data are provided by other users, so there is a chance that that information is inaccurate.
The use of Live Data (Channel selection):
Enter
the channel and press "OK"(from 000 to 254 channels in the most of control units).
The channel has been
opened. Some fields could be all blank in some channels. Channel can be changed by pressing on the channel in the top of values field and entering channel number in the range 000-254. Channel 000 and any other group that displays 10 fields instead of 4 are an exception. No scaling is possible because the control units provide no "Data Type" information with the data for these.
To swipe via the channels press
buttons.