Skip to main content
Basic settings
Edvinas avatar
Written by Edvinas
Updated over a week ago

Basic settings are used to calibrate steering angle sensor, AC flap motors, etc: the control module may try to perform various calibrations in basic settings mode.

By pressing on the

button you will be able to add, change or rate descriptions. To start basic setting you will need to enter the channel of required basic settings. After selection you can switch to an another channel by pressing on the channel number or

buttons. To start selected calibration press



Basic settings are only for professional use. We recommend to not experiment or test functions without necessity A dealer or a transport electrician may be needed to fix the consequences.

Did this answer your question?