Output test UDS
Edvinas avatar
Written by Edvinas
Updated over a week ago

The Output Test function is used to test a control module's electrical outputs (and the wiring that connects it to the various devices). To access function follow the instruction:

  • Connect to your vehicle by pressing

    .

  • Open the list of control units by pressing

    .

  • Select the needed control unit by tapping on it

    .

  • Open the Output test by pressing

    .

  • In the search bar

    you can search for needed output.

  • You can search for needed output in list

    .

  • Once you will open the needed output, you will be able to change the actuation time by pressing

    .

  • You can change the start parameter by pressing

    .

  • The selected output is turn signal, so you can change the sides of the turn signal by pressing

    .

  • You can start the output test by sliding to the right

    .

WARNING:

Do not use the output test function on any system while the car is in motion. Running output tests on the ABS brake system can temporarily disable the brakes entirely and cause individual wheels to lock and unlock. We suggest you refer to the factory repair manual for your specific car before running an output test on any control module so you will know what to expect. Running output tests on the airbag control unit can lead to unexpected results such as a vehicle that will not start. Running output test is supposed to make the airbag controller generate a simulated crash signal to the rest of the systems in the vehicle so that unlocks itself and shuts various things OFF.

Did this answer your question?